»Products»Product List

Product List

We offer a wide selection of residential and commercial heating solutions designed for use with natural gas, LP or oil. Choose a model to learn more.

Phantom II Heat Only

Available for the 2023 Heating Season! The Phantom II Heat Only is one of our newest products featuring proprietary Phantom Adaptive Technology. This is a gas-fired, stainless steel, heat-only boiler with a rate-based temperature reset, simple start-up, is field convertible to LP, and comes in four sizes.

Phantom-X 210-285

The Phantom X is a residential and light commercial stainless steel, water-tube, high efficiency, condensing, gas-fired hot water boiler. The Phantom X ships as a natural gas boiler, is field convertible to LP gas, and is available in two sizes- 210 & 285 MBH input. There are multiple venting options to suit installer preferences, and the Phantom-X is stackable for floor space savings.

Phantom-X “C” 399C-800C - Velocity Boiler Works

Phantom-X “C” 399C-800C

The Phantom-X “C” Series is a commercial stainless-steel, water tube high-efficiency, condensing, gas-fired hot water boiler. The Phantom-X “C” Series is available for use with natural gas or LP gas and comes in 5 sizes, from 399MBH to 800MBH input. There are multiple venting options to suit installer preferences, and the Phantom-X is stackable for floor space savings. The Phantom-X is available in natural gas, with a field conversion for LP gas.

Aruba 5 (AWR)

The Aruba 5 Series (AWR) residential, cast iron, hot water boiler is a fully-packaged, installer-ready product. The rear draft diverter provides a low profile design that allows for closet applications on smaller sizes. This atmospheric, gas-fired boiler is for use with a conventional chimney. The Aruba 5 Series is packaged with an electronic ignition system, and is for use with either natural or LP gas.

Phantom II Combi

Available for the 2023 Heating Season! The Phantom II Combi is one of our newest products featuring proprietary Phantom Adaptive Technology! This is a gas-fired, stainless steel, energy-efficient, combi boiler that has rate-based temperature reset, simple start-up, and is field convertible to LP.

Freeport 2 (FSZ)

The Freeport 2 FSZ Series boiler is a 3-pass cast-iron, oil-fired, steam boiler. The Freeport 2 FSZ is designed for installation with a standard chimney. This boiler is available in heating capacities from 97 to 195 MBH.

Kingston (KSB)

The Kingston (KSB) Series boiler is an installer-ready, residential, cast-iron, oil-fired, steam boiler. The Kingston is designed for installation with a standard chimney. The Kingston is available in heating capacities from 79 to 230 MBH.

Freeport 2 (FWZ)

The Freeport 2 FWZ Series boiler is a 3-pass cast-iron, oil-fired, hot water boiler. The Freeport 2 FWZ is designed for installation with a standard chimney. This boiler is available in heating capacities from 73 to 197 MBH and all models of the Freeport 2 FWZ boiler are ENERGY STAR® qualified.

Tobago (TWB)

The Tobago (TWB) Series boiler is an installer-ready, residential, cast-iron, oil-fired, water boiler. The Tobago is designed for installation with a standard chimney and is available in heating capacities from 80 to 231 MBH. Some TWB models are ENERGY STAR® qualified.

Hiboy Shorty Furnace (VCSHB60-90ABP)

The Hiboy Shorty Furnace is a residential, oil-fired warm air furnace. The Hiboy Shorty is designed for use with a conventional chimney; an optional direct sidewall vent kit is available when utilizing a chimney is not practical. The Hiboy Shorty also comes with an air conditioning ready fan control center, with conveniently located, color-coded wiring. The furnace also includes a washable air filter, as well as a heavy duty heat exchanger, manufactured from precision-made 16 gauge sheet steel, 100% welded and quality tested to last a lifetime.

Series 49

The Series 49 represents a residential/light commercial gas-fired steam boiler crafted from cast-iron. Engineered specifically for use with traditional chimneys, it comes equipped with an electronic ignition system optimized for natural gas. This versatile boiler is offered in 10 different sizes, accommodating firing rates ranging from 150 to 550 MBH. The Series 49 has an 82% AFUE for the 49-150S through 49-299S models and a thermal efficiency rating of 81% for the 49S-350 through 49S-500 models.

Notably, the Series 49 is designed with expansive internal waterways to enhance steam chest capacity, thereby promoting a steady water line. By eliminating heat transfer pins above the water line, this model exhibits enhanced resistance to corrosion in critical areas. Steam riser tappings positioned in the intermediate sections ensure smoother steam flow, while tappings on both end sections facilitate flexibility in return piping placement, whether on the right or left.

The Series 49 is delivered as a knock-down unit, comprising separate shipments of boiler sections, base, flue collector, jacket, and controls. This modular design allows for straightforward final assembly on-site, ensuring ease of installation.

Phantom XL Boiler

The Phantom XL Boiler is a commercial, high-efficiency condensing gas-fired unit that combines robust BTU output and efficiency while minimizing space requirements and enhancing serviceability.

Each Phantom XL boiler features a large diameter, commercial-grade stainless-steel water tube heat exchanger. This design not only supports high efficiency but also facilitates self-cleaning and waterside particle flushing.

The boiler’s innovative design ensures easy access to the burner and combustion chamber, allowing for swift and efficient annual servicing.

Available in sizes ranging from 399 MBH to 1000 MBH input, all Phantom XL models boast a remarkable 97% Thermal Efficiency, a 10:1 modulating turndown ratio, and full CSD-1 compliance. They are equipped with the Concert Control system to further enhance operational efficiency and control.

Bermuda Series (BSI)

The Bermuda Series (BSI) residential/light commercial, cast iron, steam boiler is a fully-packaged, installer-ready product. The integral draft diverter provides a low profile design allowing the boiler to be installed in areas requiring a low clearance. This atmospheric, gas-fired boiler is for use with a conventional chimney. The Bermuda Series is packaged with the option of either natural or LP gas as well as an electronic ignition system.

Bali 2 Series (BWF)

Bali 2 Series (BWF)

The Bali 2 Series (BWF) residential, cast iron, hot water boiler is a fully packaged, installer-ready product. An integral fan permits the venting directly through a wall. With eh addition of an optional Direct Vent Kit permits the option of using outside air for combustion.

Raptor

The stainless steel, gas-fired Raptor is our first fire tube design for natural or LP gas offering superior efficiency and performance with up to 96% AFUE. The boiler is available in five sizes – 85, 110, 155, 205, and 270 MBH. A 155-MBH combi model is also available featuring a thermostatic mixing valve and brazed plate heat exchanger. The Raptor and Raptor Combi offer home heating and optional domestic hot water built on world-class engineering.

Series 24

The Series 24 is a cast-iron water or steam boiler designed for use with light oil, gas, or a light oil-gas combination. The Series 24 is designed for installation with either a standard chimney or a pressurized vent system. The boiler has a swing-open front door for easy service and inspection.

Maxi-Therm 2

The Maxi-Therm 2 is a porcelain-enameled indirect water heater which provides abundant domestic hot water utilizing energy provided by your boiler. The porcelain-enameled tank is equipped with three sacrificial anode rods for maximum corrosion resistance and the coil is designed with a low pressure drop. The Maxi-Therm 2 also has two inch think CFC-free foam insulation keeps the water in your tank hot for hours during stand-by periods.

Hiboy Shorty Furnace (VCSHB60-90ABT)

The Hiboy Shorty Furnace is a residential, oil-fired warm air furnace. The Hiboy Shorty is designed for use with a conventional chimney; an optional direct sidewall vent kit is available when utilizing a chimney is not practical. The Hiboy Shorty also comes with an air conditioning ready fan control center, with conveniently located, color-coded wiring. The furnace also includes a washable air filter, as well as a heavy duty heat exchanger, manufactured from precision-made 16 gauge sheet steel, 100% welded and quality tested to last a lifetime.

Lowboy Furnaces (VCLBF/R68-112DBP)

Our Oil Furnaces (VCLBF/R68-112DBP) are lowboy furnaces with the blower located in back of the heat exchanger. A lowboy is a shorter height furnace with a design typically used for basement room installations with low-height restrictions.

Horizontal/Counterflow Furnaces (VCHC68-96CBP)

The VCHC68-96CBP is a multi-position compact design furnace, supporting the following configurations: horizontal left or right and downflow. This style furnace can be mounted horizontally where height restrictions are paramount. For instance, in a basement crawl space or attic. Most furnaces draw cold air in at the bottom and warm air is released out the top. In certain situations, this is not practical and a counterflow or (“downflow”) furnace is needed. In a counterflow furnace, cold air is drawn in from the top and warm air is released out the bottom.

5-Ton Hiboy Furnace (VCH8FA119P60B)

Standard features of our Oil Furnaces include a heavy-gauge drum-style heat exchanger and ceramic fiber combustion chamber, which serves to greatly reduce the combustion noise associated with expansion and contraction. This design heats up quickly, re-radiates heat back into the fire providing more complete combustion and cools down quickly after the burner is called to stop.

Mega-Stor II

The Mega-Stor II is a stainless-steel indirect, water heater which provides abundant domestic hot water powered by a variety of efficient Velocity boilers to fit every application. Available in several sizes, it has a rugged design with a coated steel jacket and heavy-duty polymer top and bottom to resist cracks and abrasions (sizes 30-75).

Raptor-X

The stainless steel, gas-fired Raptor-X comes in either a 320 or 399 MBH unit with a 10:1 turndown ratio and 95% AFUE rating. It offers home heating and optional domestic hot water built on world-class engineering.

Mega-Stor II Buffer Tank

The Mega-Stor II is a stainless-steel indirect, water heater which provides abundant domestic hot water powered by a variety of efficient Velocity boilers to fit every application. Available in several sizes, it has a rugged design with a coated steel jacket and heavy-duty polymer top and bottom to resist cracks and abrasions (sizes 30-75).

SPARQ

Phantom XL Water Heater

The Phantom XL Water Heater is a commercial condensing gas-fired unit known for its high efficiency and substantial output, designed to minimize footprint and enhance serviceability.

Each Phantom XL water heater incorporates a robust, large-diameter stainless-steel water tube heat exchanger, facilitating self-cleaning and waterside particle flushing.

The design allows for easy access to the burner and combustion chamber, ensuring swift and efficient annual servicing.

Available in sizes ranging from 399 MBH to 1000 MBH input, all models achieve a remarkable 98% Thermal Efficiency and feature a 10:1 modulating turndown ratio, meeting CSD-1 compliance standards. Additionally, they are equipped with the advanced Concert Control system.