Phantom II Heat Only

The Phantom II is one of our newest products, and features Phantom Adaptive Technology! This is a gas-fired, stainless steel, heat-only boiler with:

– Easy access to key components
– Fully removable front & side panels
– Drop-down control center

Download Brochure Print Page

Type:	Residential
Heat Exchanger:	Stainless Steel
Fuel:	Gas Fired (Natural Gas or LP)
Heating Input:	8-80/13.6-120/20-150/20-180 MBH
Efficiency (AFUE)	95%
Venting:	Direct Vent
Ignition:	Direct Spark
Trim:	Water
Domestic Water:	N/A
Burner:	Modulating with 10:1 turndown ratio
Configuration:	Packaged

Swipe to scroll the table

Notes:

Input and DHW draw limits for elevations up to 2,000 ft. with min vent length. See Table 3-3 for vent diameter connection sizes and derate at max vent length.
Net AHRI Water Ratings shown are based on a piping and pickup allowance of 1.15. The manufacturer should be consulted before selecting a boiler for installations having unusual piping and pickup requirements, such as intermittent operation, extensive piping systems, etc.
For altitudes above 2,000 ft., PHNTM2080 minimum input increased to 10 MBH.